The book carefully presents the fundamentals of materials processing along with their relevant applications, so that the reader can clearly assess the capabilities, limitations, and potentials of manufacturing processes and their competitive aspects. Using real-world examples and well-wrought graphics, this book covers a multitude of topics, including the mechanical behavior of materials; the structure and manufacturing properties of metals; surfaces, dimensional characteristics, inspection, and quality assurance; metal-casting processes including heat treatment; bulk deformation processes; sheet-metal forming processes; material removal processes; polymers, reinforced plastics, rapid prototyping and rapid tooling; metal powders, ceramics, glasses, composites, and superconductors; joining and fastening processes; microelectronic and micromechanical devices; automation; computer-integrated systems; and product design. For manufacturing engineers, metallurgists, industrial designers, material handlers, product designers, and quality assurance managers.

    For examples see chapters 3, 4, 5 and 9. * Mechanical property coverage The Sixth Edition maintains its extensive, introductory level coverage of mechanical properties and failure--the most important materials considerations for many engineers. For examples see chapters 6, 7, & 8. * A picture is worth 1000 words! The Sixth Edition judiciously and extensively makes use of illustrations and photographs. The approximate 500 figures include a large number of photographs that show the microstructure of various materials (e.g., Figures 9.12, 10.8, 13.12, 14.15 and 16.5). * Current and up-to-date Students are presented with the latest developments in Material Science and Engineering. Such up-to-date content includes advanced ceramic and polymeric materials, composites, high-energy hard magnetic materials, and optical fibers in communications. For examples see sections 13.7, 15.19, 16.8, 20.9, and 21.14. * Why study These sections at the beginning of each chapter provide the student with reasons why it is important to learn the material covered in the chapter. * Learning objectives A brief list of learning objectives for each chapter states the key learning concepts for the chapter. * Resources to facilitate the materials selection process. Appendix B, which contains 11 properties for a set of approximately 100 materials, is included which be used in materials selection problems. An additional resource, Appendix C, contains the prices for all materials listed in Appendix B. * The text is packaged with a CD-ROM that contains 1) interactive software modules to enhance visualization of three-dimensional objects, 2) additional coverage of select topics, and 3) complete solutions to selected problems from the text in order to assist students in mastering problem-solving.

    It covers all fundamental subjects, including elasticity, structural analysis, airworthiness and aeroelasticity. Now in its fourth edition, the author has revised and updated the text throughout and added new case study and worked example material to make the text even more accessible.The leading Aircraft Structures text, covering a complete course from basic structural mechanics to finite element analysisEnhanced pedagogy with additional case studies, worked examples and home work exercises

    Whenyou upgrade to Extra Class, you gain access to the entire Amateur Radio frequency spectrum. Ues this book to ace the top-level ham radio licensing exam. Our expert instruction will lead you through all of the knowledge you need to pass the exam: rules, specific operating skills and more advanced electronics theory.

     This text gives expanded explanations of the fundamentals of vibration including history of vibration, degree of freedom systems, vibration control, vibration measurement, and more. For engineers and other professionals who want a clear introduction to vibration engineering.

    MATLAB has been incorporated throughtout, both in examples and problems.

    An exceptional book written by a true professional.

    He includes information on Java Platform Standard Edition 6 (Java SE 6) and offers complete coverage of the Java language, its syntax, keywords, and fundamental programming principles.

    It follows a more quantitative and design-oriented approach than other texts in the market, helping readers gain a better understanding of important concepts. They'll also discover how material properties relate to the process variables in a given process as well as how to perform manufacturing science and quantitative engineering analysis of manufacturing processes.

    

    It provides many detailed, practical design and analysis examples intended to relate theory to the workplace. Chapter topics include first experiences with an op amp; inverting and noninverting amplifiers; comparators and controls; selected applications of op amps; signal generators; op amps with diodes; differential, instrumentation, and bridge amplifiers; DC performance: bias, offsets, and drift; AC performance: bandwidth, slew rate, noise; active filters; modulating, demodulating, and frequency changing with the multiplier; integrated-circuit timers; digital-to-analog converters; analog-to-digital converters; and power supplies. For design engineers rs

    It's much more than a knot book, though the knots a sailor needs are all here. It's a book for sailors who want the satisfaction and hard-cash savings of stepping their own masts, inspecting and maintaining their own rigs, and turning their own tailsplices and wire eyesplices. It is for boatowners who want to replace an entire gang of rigging themselves--measuring, choosing appropriate wire, turning soft eyes, leathering, and serving. It is for bluewater voyagers who want to feel secure in the knowledge that, should a shroud carry away far at sea, they will be able to repair it.The Complete Rigger's Apprentice is also a free-roaming collection of useful ideas and tips on everything from supplementing winches with block and tackle, to rigging snubbers at anchor, to using pantyhose for an emergency fanbelt. In short, it's the definitive book on the art of rigging, written by its most entertaining practitioner.

    Maybe you re going for MCSA first, then MCSE. Maybe you need to upgrade your current credentials. Now, direct from Microsoft, this set brings together all the study resources you ll need. You get the brand-new Second Edition of all four books: for Exam 70-290 (Managing and Maintaining a Windows Server Environment), 70-291 and 70-293 (Network Infrastructure), and 70-294 (Active Directory). What s new here? Deeper coverage, more case studies, more troubleshooting, plus significant new coverage: Emergency Management Services, DNS, WSUS, Post-Setup Security Updates, traffic monitoring, Network Access Quarantine Control, and much more. There are more than 1,200 highly customizable CD-based practice questions. And, for those who don t have easy acess to Windows Server 2003, there s a 180-day eval version. This package isn t cheap, but there s help there, too: 15% discount coupons good toward all four exams. Bill Camarda, from the August 2006 href="http://www.barnesandnoble.com/newslet... Only

    It is also recommended for students studying btech, be, and other professional courses related to machine design. The book is systematic and is presented in clear and simple language. The syllabus of the book is in line with the course at nmims. It is good reference book for students of other colleges too. The book explains the life cycle of engineering design, with respect to machines beginning from identifying a problem, defining it in relatively simpler terms, considering the environment in which it operates, and finding a solution to solve problems or improvise methods. It includes more than 30 chapters like shafts, levers, chain drives, power screws, flywheel, springs, clutches, brakes, welding joints, pressure vessels, spur gears, internal combustion engine parts, bevel gears, pipes and pipe joints, worms gears, columns and struts, riveted joints, keys and coupling, and more. S chand publishing is the publisher of a textbook of machine design, and it was published in 2005. This 25th revised edition book is available in paperback. Key features: this is a multi-coloured edition with pictures, illustrations, diagrams, and graphics to support the concepts explained. About the authorsj k gupta and r s khurmi have authored the book. Dr r s khurmi worked as a professor in delhi university, and now he writes books on engineering. J k gupta is also a technical writer, and writes mostly in collaboration with r s khurmi. They have their individual authored books as well like strength of material, life and work of ramesh chunder dutta c. I. E, and history of sirsa town. Some of the books that have been authored by both of them are refrigeration tables with chart, textbook of refrigeration and airconditioning (m. E.

    It includes ARIS, which have algorithmic problems, and a case study on power transmission. It also presents a study that help illuminate the complexities of shafts and axles.