Authors James Watkins and Paul Wandless, along with a group of distinguished artisans, demonstrate in detail how to build low-cost, low-tech, yet high-quality kilns. The plans range from an easy, affordable, and versatile Raku Kiln to a unique wood-fueled Downdraft Stovepipe Barrel one. These clever devices make it possible to produce rich surface effects from alternative reduction firing techniques. In addition to showing the basic procedures for using each kiln, easy-to-follow directions for many fast-fire methods unfold in color photographs: You’ll see how to achieve terra sigillata surfaces with direct chemical application, and how to do traditional crackle-glaze raku and smoke finishes.

    In this book, Sunshine Cobb covers all the foundational skills, with lessons for constructing both simple and complex forms from clay. Ceramic artists will also find a variety of next-level techniques and tips: designing templates and replicating pieces, lidded vessels, using molds, a variety of decorative techniques, and other avenues of exploration are all inside.Artist features and inspirational galleries include work from today's top working artists, such as Bryan Hopkins, Lindsay Oesterritter, Liz Zlot Summerfield, Bandana Pottery, Shoko Teruyama, Courtney Martin, Sam Chung, Deborah Schwartzkopf, and many more.  Take your hand building skills—and your artwork—to the next level with Mastering Hand Building. The Mastering Ceramics series is for artists who never stop learning. With compelling projects, expert insight, step-by-step photos, and galleries of work from today’s top artists, these books are the perfect studio companions. Also available from the series: Mastering the Potter's Wheel and Mastering Kilns and Firing.

    Longtime skateboard artist Sean Cliver put together this staggering survey of over 1,000 skateboard graphics from the last 30 years, creating an indispensable insiders' history as he did so.Alongside his own history, Sean has assembled a wealth of recollections and stories from prominent artists and skateboarders such as: Andy Howell, Barry McGee, Ed Templeton, Steve Caballero, and Tony Hawk.The end result is a fascinating historical account of art in the skateboard subculture, as told by those directly involved with shaping its legendary creative face.

    Her own lifelong love for cooking and gardening paired with her many travels to the Amazon with chef Regina Pinto has resulted in rich spiritual and culinary experiences that will inspire your cooking and gatherings. More than an ordinary cookbook, A Place at the Table offers readers a chance to not only approach mealtimes with accessible recipes from a renowned chef, but also hear heartwarming, personal stories from Kelly herself and enjoy some spiritual encouragement too. For Kelly, meals should be more than just ingredients and décor, though these enhance the experience. Food has historically gathered people together, and in this cookbook, Kelly points readers to just that—opening their tables so others can have a place to experience the love of God and fellowship of his people. After all, some of the most meaningful moments in the Bible were experienced around food. This cookbook offers a delicious, unfussy selection of both well-known and novel dishes, and it also includes personal favorites from Kelly and Regina. Featuring fresh, whole or homegrown components, Kelly prioritizes the value of flavors that can only come with seasonal ingredients. As a bonus, there is supplemental material throughout, where the reader can hear more from Kelly and Regina about broths, seasonal drinks, canning, décor, growing herbs, and more. In these pages, Kelly’s humor and warmth shine through in each story, and the stunning photography inspires all readers to put their hand to the joy of cooking, offering others not just a meal, but a place to belong.

    Trends and Issues in Instructional Design and Technology is intended to provide readers with a clear picture of the field of instructional design and technology, the trends and issues that have affected it in the past and present, and those trends and issues likely to affect it in the future. Professionals in the field need to be able to do more than just perform the skills associated with IDT. They need to be able to clearly describe the nature of the field, be familiar with the field's history and its current status, and be able to describe recent trends and issues that are having, or are likely to have, an impact on the field. The purpose of this book is to help readers attain these goals.

    The textbook covers all-important workbenches of CATIA V5R17 with a thorough explanation of all commands, options, and their applications to create real-world products. About 55 mechanical engineering industry examples are used as tutorials and an additional 35 as exercises to ensure that the user can relate their knowledge and understand the design techniques used in the industry to design a product. After reading the textbook, the user will be able to create solid parts, assemblies, drawing views with bill of materials, surface models, and Sheet metal components. Also, the user will learn the editing techniques that are essential to make a successful design. In this book, the author emphasizes on the solid modeling techniques that improve the productivity and efficiency of the user. Salient Features of the Textbook Consists of 15 chapters that are organized in a pedagogical sequence. These chapters cover the Sketching, Modeling, Assembly, Drafting, Wireframe and Surface Design, and Generative Sheetmetal workbenches of CATIA V5R17. The first page of every chapter summarizes the topics that will be covered in it. Additional information is provided throughout the book in the form of tips and notes. Self-evaluation test and review questions are provided at the end of each chapter so that the users can assess their knowledge.Free Teaching and Learning Resources Online technical support by contacting techsupport@cadcim.com. All programs used in exercises and examples. Customizable PowerPoint presentations of all chapters in the textbook li>Instructor s Guide with solutions to all review questions and exercises in the textbook. Student projects to enhance the skills Class tests that can be used by faculty in the class To access these free teaching resources, please send your contact information to sales@cadcim.com, mentioning clearly your name, designation, university/college, street street address, city, state, zip, and country.

    The Ceramics Bible is the most comprehensive and up-to-date volume on the subject. Brimming with more than 700 full-color photos and illustrations, this is the new definitive guide for serious ceramics practitioners. Inside are step-by-step instructions on molding, firing, and glazing techniques, generously accompanied by detailed photographs. Also included are beautiful examples of contemporary work, plus plenty of historical information, artist profiles, troubleshooting tips, and an extensive resource section. Perfect for students, artists, and collectors, this is a tremendously valuable addition to the vibrant world of ceramics.

    What she and her family got was an introduction to what many think is the country’s next great health crisis.

    The author instructs in coil, slab, mold, and pinch techniques to produce pots, bowls, vases, tiles, and other decorative pieces. She also advises on acquiring basic tools, mixing and preparing clay, and using coloring agents. Newcomers to pottery crafting will especially appreciate her tips for making projects easier to accomplish, such as use of a hairdryer at regular intervals for drying out too-wet clay, and easy methods for keeping clay soft and pliable. Step-by-step color photos with detailed captions guide handcrafters through each project from start to finish. Many photos are of the cutaway type to show correct hand positions for controlling the clay, both inside and outside the form. Here's the book that takes the mystery out of handbuilding in clay, demonstrating each step in the pottery-making process. More than 400 color photos.

    Everything you ever wanted to know about scales, but were afraid to ask! This book fills you in on major and minor scales; the modes; the blues scale; harmonic minor, melodic minor, chromatic, whole tone & diminished scales; other exotic and ethnic scales; and more. Includes easy-to-read fretboard diagrams, and a bio of Troy Stetina.

    The experts at Better Homes & Gardens have collected all the inspiration you need to turn a ho-hum space into a showstopper.

    These are smart concepts you'll grasp in a single glance and brief caption: shortcuts and quick pick-me-ups, artful displays, visual tricks that create a sense of space, “sneaky” storage to clear the clutter, and simple DIY projects (like crafting a bed canopy with ready-made curtains). All the suggestions are practical, pretty, and easy to implement.

    What is the value of things made by an anonymous craftsman working in a set tradition for a lifetime? What is the value of handwork? Why should even the roughly lacquered rice bowl of a Japanese farmer be thought beautiful? The late Soetsu Yanagi was the first to fully explore the traditional Japanese appreciation for objects born, not made.Mr. Yanagi sees folk art as a manifestation of the essential world from which art, philosophy, and religion arise and in which the barriers between them disappear. The implications of the author's ideas are both far-reaching and practical.Soetsu Yanagi is often mentioned in books on Japanese art, but this is the first translation in any Western language of a selection of his major writings. The late Bernard Leach, renowned British potter and friend of Mr. Yanagi for fifty years, has clearly transmitted the insights of one of Japan's most important thinkers. The seventy-six plates illustrate objects that underscore the universality of his concepts. The author's profound view of the creative process and his plea for a new artistic freedom within tradition are especially timely now when the importance of craft and the handmade object is being rediscovered.

    It also contains the easy to follow instructions on how to analyze and compute the structural design of critical building parts such as: reinforced concrete slabs, beams, columns and footings. There are also simple designs and floor plans for a variety of building types to be found in this book.BUILDING DESIGN AND CONSTRUCTION should be of interest to architects, engineers, contractors, developers and allied professionals who are engaged in building design, planning and construction. Students and graduates reviewing for the board examinations for architects and engineers would find in this book valuable practical knowledge to supplement the theories learned in their classrooms.Project owners studying this book would appreciate and get a clear understanding of how their envisioned pet project, which sprang only from a mere idea - is transformed slowly step-by-step - into concrete form.Explanations and instructions in BUILDING DESIGN AND CONSTRUCTION are conveyed in direct and simple language for easy understanding even by the layman. Plans and drawings are clearly presented, to be easily interpreted by construction workers.

    It is also recommended for students studying btech, be, and other professional courses related to machine design. The book is systematic and is presented in clear and simple language. The syllabus of the book is in line with the course at nmims. It is good reference book for students of other colleges too. The book explains the life cycle of engineering design, with respect to machines beginning from identifying a problem, defining it in relatively simpler terms, considering the environment in which it operates, and finding a solution to solve problems or improvise methods. It includes more than 30 chapters like shafts, levers, chain drives, power screws, flywheel, springs, clutches, brakes, welding joints, pressure vessels, spur gears, internal combustion engine parts, bevel gears, pipes and pipe joints, worms gears, columns and struts, riveted joints, keys and coupling, and more. S chand publishing is the publisher of a textbook of machine design, and it was published in 2005. This 25th revised edition book is available in paperback. Key features: this is a multi-coloured edition with pictures, illustrations, diagrams, and graphics to support the concepts explained. About the authorsj k gupta and r s khurmi have authored the book. Dr r s khurmi worked as a professor in delhi university, and now he writes books on engineering. J k gupta is also a technical writer, and writes mostly in collaboration with r s khurmi. They have their individual authored books as well like strength of material, life and work of ramesh chunder dutta c. I. E, and history of sirsa town. Some of the books that have been authored by both of them are refrigeration tables with chart, textbook of refrigeration and airconditioning (m. E.