All of the fundamentals of robotics are covered--robotics analysis; including kinematics, kinetics and force control, and trajectory planning of robots; its sub-systems such as actuators, sensors, and vision systems; as well as robotics applications. "Introduction to Robotics" also includes many subjects related to mechatronics, microprocessor actuator control, integration of sensors, vision systems, and fuzzy logic. For practicing mechanical engineers, electronic and electric engineers, computer engineers, and engineering technologists who would like to learn about robotics.

    This edition features new material on Controls, Computer-Aided Design and Manufacturing, and Off-Line Programming Systems.

    * Chapter on Verilog HDL allows for rapid start-up. * Illustrates the top-down design procedure used in modern VLSI chip design with an emphasis on variations in the HDL, logic, circuits and layout.

    

    This edition retains the scope and emphasis that have made the book very successful while adding over twenty new numerical examples and over 550 new end-of-chapter problems.

    

    This book is for civil engineers that teach fluid mechanics both within their discipline and as a service course to mechanical engineering students. As with all previous editions this 10th edition is extraordinarily accurate, and its coverage of open channel flow and transport is superior. There is a broader coverage of all topics in this edition of Fluid Mechanics with Engineering Applications. Furthermore, this edition has numerous computer-related problems that can be solved in Matlab and Mathcad.

    Pure Substances, The First And Second Laws, Gases, Psychrometrics, The Vapor, Gas And Refrigeration Cycles, Heat Transfer, Compressible Flow, Chemical Reactions, Fuels, And More Are Presented In Detail And Enhanced With Practical Applications. This Version Presents The Material Using SI Units And Has Ample Material On SI Conversion, Steam Tables, And A Mollier Diagram. A CD-ROM, Included With The Print Version Of The Text, Includes A Fully Functional Version Of Quickfield (Widely Used In Industry), As Well As Numerous Demonstrations And Simulations With MATLAB, And Other Third Party Software.

    Written for the engineer as well as the race car enthusiast, the authors, who developed many of the original vehicle dynamics theories and principles covered in this book, including the Moment Method, pair analysis and lap time simulation, include much information that is not available in any other vehicle dynamics text.

    Dozens of key charts, tables, and graphs, including updated steam tables and two new charts of LMTD heat exchanger correction factors, make it possible to work most exam problems using the Reference Manual alone. A complete, easy-to-use index saves you valuable time during the exam as it helps you quickly locate important information needed to solve problems._____________________________Since 1975 more than 2 million people preparing for their engineering, surveying, architecture, LEED®, interior design, and landscape architecture exams have entrusted their exam prep to PPI. For more information, visit us at www.ppi2pass.com.

     Offers extensively updated coverage, new problem sets, and chapter-ending material to enhance the book’s relevance to today’s engineers and scientists. Includes new problem sets demonstrating updated applications to engineering as well as biological, physical, and computer science. Emphasizes key ideas as well as the risks and hazards associated with practical application of the material. Includes new material on topics including: difference between discrete and continuous measurements; binary data; quartiles; importance of experimental design; “dummy” variables; rules for expectations and variances of linear functions; Poisson distribution; Weibull and lognormal distributions; central limit theorem, and data plotting. Introduces Bayesian statistics, including its applications to many fields. For those interested in learning more about probability and statistics.

    Das' Sixth Edition of PRINCIPLES OF FOUNDATION ENGINEERING maintains the careful balance of current research and practical field applications that has made it the leading text in foundation engineering courses. Featuring a wealth of worked-out examples and figures that help students with theory and problem-solving skills, the book introduces civil engineering students to the fundamental concepts and application of foundation analysis design. Throughout, Das emphasizes the judgment needed to properly apply the theories and analysis to the evaluation of soils and foundation design as well as the need for field experience. The sixth edition contains many new homework and worked-out problems.

     The 3D Printing Handbook provides practical advice on selecting the right technology and how-to design for 3D printing, based upon first-hand experience from the industry’s leading experts. In this book: The mechanisms behind all major 3D printing technologies The benefits and limitations of each technology Decision making tools for technology selection Actionable design advice and guidelines Industry case studies from world-leading brands

    It also contains subject matter included on tests given by the National Institute for Automotive Service Excellence (ASE) for engine repair and engine machinists.

    The LEGO MINDSTORMS NXT 2.0 Discovery Book is the complete, illustrated, beginner's guide to MINDSTORMS that you've been looking for. The crystal clear instructions in the Discovery Book will show you how to harness the capabilities of the NXT 2.0 set to build and program your own robots. Author and robotics instructor Laurens Valk walks you through the set, showing you how to use its various pieces, and how to use the NXT software to program robots. Interactive tutorials make it easy for you to reach an advanced level of programming as you learn to build robots that move, monitor sensors, and use advanced programming techniques like data wires and variables. You'll build eight increasingly sophisticated robots like the Strider (a six-legged walking creature), the CCC (a climbing vehicle), the Hybrid Brick Sorter (a robot that sorts by color and size), and the Snatcher (an autonomous robotic arm). Numerous building and programming challenges throughout encourage you to think creatively and to apply what you've learned as you develop the skills essential to creating your own robots.Requirements: One LEGO MINDSTORMS NXT 2.0 set (#8547)FeaturesA complete introduction to LEGO MINDSTORMS NXT 2.0 Building and programming instructions for eight innovative robots 50 sample programs and 72 programming challenges (ranging from easy to hard) encourage you to explore newly learned programming techniques 15 building challenges expand on the robot designs and help you develop ideas for new robotsWho is this book for? This is a perfect introduction for those new to building and programming with the LEGO MINDSTORMS NXT 2.0 set. The book also includes intriguing robot designs and useful programming tips for more seasoned MINDSTORMS builders.