This book also features the design process, streamlined coverage of statistics, an overview of materials and materials selection, failure and fatigue, and review of basic strength of materials topics.

    

    It provides many detailed, practical design and analysis examples intended to relate theory to the workplace. Chapter topics include first experiences with an op amp; inverting and noninverting amplifiers; comparators and controls; selected applications of op amps; signal generators; op amps with diodes; differential, instrumentation, and bridge amplifiers; DC performance: bias, offsets, and drift; AC performance: bandwidth, slew rate, noise; active filters; modulating, demodulating, and frequency changing with the multiplier; integrated-circuit timers; digital-to-analog converters; analog-to-digital converters; and power supplies. For design engineers rs

    But Neil Armstrong and Sally Ride would have never made history, and humankind would not have touched the stars, if not for the men and women on the ground who lit the fuse that launched the first rockets.Enthralled as a boy by the exploits of Flash Gordon and the novels of Robert Heinlein and Arthur C. Clarke—who put the science in science fiction—James French became one of the original unsung engineers of America’s groundbreaking space program. His fascinating memoir offers an up-close-and-technical look at building, testing, and perfecting the pioneering Saturn rockets and original lunar landing module, and he shares true tales, both humorous and harrowing, of life—and near death—on the front lines of scientific exploration.If you’ve ever said, “It’s not rocket science,” you’re right. It’s rocket engineering—and here’s your chance to marvel at how it changed the world and made it possible to explore all that lies beyond Earth. James R French graduated from MIT in 1958 with a degree of BSME Specializing in Propulsion. His first job was with Rocketdyne Division of North American Aviation where he worked on developmental testing of H-1 engines and combustion devices hardware for F-1 and J-2 engines used in Saturn 5. Mr. French has also worked at TRW Systems, where he was Lead Development Test Engineer on the Lunar Module Descent Engine, and Jet Propulsion Laboratory where he was Advanced Planetary studies Manager as well as Chief Engineer for the SP-100 Space Nuclear Power System and worked on Mariners 5, 6, 7, 8, and 9; Viking 1 & 2 and Voyager 1 & 2. . In 1986, he helped found American Rocket Co., a commercial launch company.Since 1987, Mr. French has been consultant to a variety of aerospace companies, SDIO, NASA, and USAF. He has participated in various startup companies in the private space flight arena and currently consults extensively to Blue Origin. Mr. French is co-author with Dr. Michael Griffin of the best-selling text Space Vehicle Design, published by AIAA. The second edition of the book has received the Summerfield Book Award for 2008. Mr. French is a Fellow of both AIAA and the British Interplanetary Society and a 50+ year member of AIAA. He has held several Technical Committee and other posts in AIAA. Cover design by Evan Twohy

    It's much more than a knot book, though the knots a sailor needs are all here. It's a book for sailors who want the satisfaction and hard-cash savings of stepping their own masts, inspecting and maintaining their own rigs, and turning their own tailsplices and wire eyesplices. It is for boatowners who want to replace an entire gang of rigging themselves--measuring, choosing appropriate wire, turning soft eyes, leathering, and serving. It is for bluewater voyagers who want to feel secure in the knowledge that, should a shroud carry away far at sea, they will be able to repair it.The Complete Rigger's Apprentice is also a free-roaming collection of useful ideas and tips on everything from supplementing winches with block and tackle, to rigging snubbers at anchor, to using pantyhose for an emergency fanbelt. In short, it's the definitive book on the art of rigging, written by its most entertaining practitioner.

    The book also provides a balanced presentation of time-varying and static fields, preparingstudents for employment in today's industrial and manufacturing sectors. Streamlined to facilitate student understanding, this edition features worked examples in every chapter that explain how to use the theory presented in the text to solve different kinds of problems. Numerical methods, including MATLAB and vector analysis, are also included to help students analyzesituations that they are likely to encounter in industry practice. Elements of Electromagnetics, Fifth Edition, is designed for introductory undergraduate courses in electromagnetics.

    This Eighth Edition of Vector Mechanics for Engineers: Statics marks the fiftieth anniversary of the Beer/Johnston series. Over the years, these textbooks have introduced theoretical and pedagogical innovations in statics, dynamics, and mechanics of materials education.

    It illustrates both the cohesiveness of the relatively few fundamental ideas in this area and the great variety of problems these ideas solve. All of the problems address principles and procedures inherent in the design and anlysis of engineering structures and mechanical systems, with many of the problems referring explicitly to design considerations.

    The book carefully presents the fundamentals of materials processing along with their relevant applications, so that the reader can clearly assess the capabilities, limitations, and potentials of manufacturing processes and their competitive aspects. Using real-world examples and well-wrought graphics, this book covers a multitude of topics, including the mechanical behavior of materials; the structure and manufacturing properties of metals; surfaces, dimensional characteristics, inspection, and quality assurance; metal-casting processes including heat treatment; bulk deformation processes; sheet-metal forming processes; material removal processes; polymers, reinforced plastics, rapid prototyping and rapid tooling; metal powders, ceramics, glasses, composites, and superconductors; joining and fastening processes; microelectronic and micromechanical devices; automation; computer-integrated systems; and product design. For manufacturing engineers, metallurgists, industrial designers, material handlers, product designers, and quality assurance managers.

    

    Like earlier editions of the book, physical concepts are highlighted while also giving necessary attention to math-ematical techniques. Both theory and modeling are developed from simple beginnings so that they can be readily extended to new and complex situations. Beginning in Ch. 3, students are introduced to new concepts critical to analyzing power systems, including coverage of both balanced and unbalanced operating conditions. The authors incorporate new tools and material to aid students with design issues and reflect recent trends in the field. Each book now contains a CD with Power World software. This package is commonly used in industry and will enable students to analyze and simulate power systems. The authors use the software to extend, rather than replace, the fully worked examples provided in previous editions. In the new edition, each Power World Simulator example includes a fully worked hand solution of the problem along with a Power World Simulator case (except when the problem size makes it impractical). The new edition also contains updated case studies on recent trends in the Power Systems field, including coverage of deregulation, increased power demand, economics, and alternative sources of energy. These case studies are derived from real life situations.

    ―Jacob Boudreau CTO of Stord | Forbes 30 Under 30 Joel's book and show provide incredible insights for young startup developers and fellow CTOs alike. Joel offers a human perspective and real practical advice on the challenges and opportunities facing every Modern CTO. ― Christian Saucier | Entrepreneur and P2P Systems Architect I've really come to respect what Joel is doing in the community. His podcast and book are filling a much needed hole and I'm excited to see what else the future has in store. ― Don Pawlowski Chief Technology Officer at University Tees Modern CTO Everything you need to know to be a Modern CTO. Developers are not CTOs, but developers can learn how to be CTOs. In Modern CTO, Joel Beasley provides readers with an in-depth road map on how to successfully navigate the unexplored and jagged transition between these two roles. Drawing from personal experience, Joel gives a refreshing take on the challenges, lessons, and things to avoid on this journey.Readers will learn how Modern CTOs: Manage deadlines Speak up Know when to abandon ship and build a better one Deal with poor code Avoid getting lost in the product and know what UX mistakes to watch out for Manage people and create momentum … plus much more Modern CTO is the ultimate book when making the leap from developer to CTO. Update: Kindle Formatting issues resolved 5/13/18. Thank you for the feedback.

    With pedagogical use of second color, it covers devices in one place so that circuit characteristics are developed early.

    Mastering this art will not only make you the most desired developer in the market, but it will transform the craziest deadline into "Consider it done, Sir".